This checklist has been provided to assist in summarizing the typical requirements to obtain a building permit if you plan to erect a temporary tent and you answer "yes" to any of the following statements:
- Is the tent more than 60 m2 (645 ft2) in aggregate ground area*?
- Will the tent be attached to a building?
- Will the the tent be erected less than 3 m (9'-10") from other structures.
* The aggregate ground area refers to the sum of the total area of all tents on site. Therefore, if the total ground area of all tents on site exceed 60 m2 (645 ft2), then a permit is required.
Drawings that are prepared by a qualified designer (as defined in the Ontario Building Code) must include:
- The qualified designer’s name
- The qualified designer’s registration number
- The qualification identification number of the qualified designer (Building Code Identification Number: BCIN)
- The qualified designer's signature
- The stamp or statement that the qualified designer has reviewed and taken responsibility for the design activities.
This is the standard building permit application form for all building permits.
This form is to be used only where the Owner is not the Applicant.
This checklist summarizes the most common approvals required
Owner commitment to have general review undertaken by Architects and/or Professional Engineers
- A detailed Site Plan showing the location of the proposed tent(s) or group of tents, setback from property lines.
- Flame Spread Resistance information. Every tent, and tarpaulins, decorative materials, fabrics and films used in connection with tents, shall be certified to CAN/ULC-S109, “Flame Tests of Flame- Resistant Fabrics and Films” or NFPA 701 “Fire Tests for Flame-Resistant Textiles and Films”.
- Adequate sanitary facilities shall be provided in accordance with the following Building Code requirements:
188.8.131.52. Sanitary Facilities
(1) Except as provided in Sentence (3), the minimum number of water closets for tents shall be determined in accordance with Table 184.108.40.206.E.(2) Article 220.127.116.11. applies to sanitary facilities in Sentence (1).
(3) Sanitary privies, chemical closets or other means for the disposal of human waste may be provided in lieu of toilet fixtures.
In accordance with the Ontario Building Code, a professional engineer shall be obtained under the following circumstances:
- Tents greater than 225m2
- A group(s) of tents (spaced less than 3 m apart) with an aggregate area greater than 225m2
- Tents that contain bleachers or tents that are enclosed with sidewalls
In many instances before a building permit application can be processed and a permit issued, there are approvals from other agencies that may be required. These approvals are not administered by Building Services. Please ensure all required approvals are complete prior to submitting your application using the Applicable Law Checklist:
- Tents up to 225m2 (2,242ft2) $125.00 Flat Fee
- Tents > 225m2 (2,242ft2) $200.00 Flat Fee
- Submit the complete permit application and all supporting documents using the e-Permit Service. An automatic email will be sent to you once you submit the e-Permit application.
- Staff will complete a pre-screen of the application to review for completeness, compliance with the Building Code and Applicable Law. A status update will be sent via email within mandated timelines.
- Application review comments are provided during review to identify any outstanding requirements and to summarize permit fees.
- Permit issued when review is complete and all required fees are paid.